Portable/Hand Carry Compressors Offered by Davmar Air Compressors Jenny/Emglo Ingersoll-Rand
RolAir-Portable Air Compressors
-Lightweight, compact and extremely portable.
-Splash Lubricated Pump
-Cast-Iron Cylinder
-Many designs. Pick the one that works for you.




- Single/Two Stage Wheeled Portable




Jenny/Emglo - Hand Carry & Wheeled Portable Air Compressors
-
Hand Carry
Standard Features:
- Lightweight, compact and extremely portable.
- Single stage, direct coupled, oil lubricated pump.
- Cast iron cylinder for extended pump life.
- Aluminum head for better heat dissipation.
- Each unit is filled Jenny Ultimate Blue Compressor Pump Oil.
- Canister inlet filter with replaceable filter elements.
- Forced ventilation cooling system.
- Powder coated heavy duty steel tank and frame assembly.
- Protectively mounted fittings. Anti-vibration feet.
- Air line regulator and two gauges for line and tank pressure.
- Pressure relief safety valve.
- Manual tank drains(s).
- Special unloading valves to assist in motor/engine starting.
Gasoline Engine Features:
- High quality pilot valve.
- Pneumatic throttle idle control.
- Constant run control set at 105-125 PSI.
- Recoil start Honda GX Series OHV Engine.
-
Single/Two Stage Wheeled Portable
Standard Features:
- Heavy-duty single or two stage cast iron compressor pump.
- Made in Somerset, PA USA.
- Splash lubricated.
- Finned intercooler (two stage only).
- Belt driven with a large flywheel for extra cooling and easier start-up.
- Each unit is filled with Jenny Ultimate Blue Compressor Pump Oil.
- Directional air shroud for reduced pump temperatures.
- Totally enclosed heavy-duty belt guard.
- 8 & 15 gallon tanks are low profile, powder coated twin tank receivers.
- 17 & 30 gallon tanks are powder coated and ASME certified.
- Convenient lifting handles.
- Anti-vibration feet.
- Pneumatic tire(s).
- Protectively mounted fittings.
- Manual tank drain(s).
- Large canister intake filter with replaceable filter elements.
- Special unloading valves to assist in motor starting.
- Stainless steel braided discharge hose.
- Tank gauge.
- Regulator and outlet pressure gauge.
- Pressure relief safety valve.
- Designed, tested and proven to meet the demands of the construction and rental industry.
Electric Motor Features:
- Constant run control set at 105-125 PSI (single stage) or 145-175 PSI (two stage).
- High quality pilot valve.
- Industrial/Commercial grade UL Listed electric motor.
- Thermal overload motor protection.
- 6 ft. power cord.
Gasoline Motor Features:
- Constant run control set at 105-125 PSI (single stage) or 145-175 PSI (two stage).
- High quality pilot valve.
- Pneumatic throttle idle control.
- Honda GX Series OHV Engine.
-
Special Portable
- Single/Two Stage Skid Mount
- Two Stage Trailer
- Single Stage Gas Drive Compressor/Generator
Standard Features:
- Heavy-duty single or two stage cast iron compressor pump.
- Made in Somerset, PA USA.
- Splash lubricated.
- Belt driven with a large flywheel for extra cooling and easier start-up.
- Finned intercooler (two stage only).
- Centrifugal unloader (two stage only).
- Each unit is filled with Jenny Ultimate Blue Compressor Pump Oil.
- Totally enclosed heavy-duty belt guard.
- Directional air shroud for reduced pump temperatures.
- Powder coated ASME certified receivers.
- Protectively mounted fittings.
- Manual tank drain(s).
- Large canister intake filter with replaceable filter elements.
- All tanks are powder coated and ASME certified.
- High quality special unloading valves to assist in motor starting.
- Stainless steel braided discharge hose.
- Tank gauge.
- Regulator and outlet pressure gauge.
- Pressure relief safety valve.
- Constant run control set at 105-125 PSI (single stage) or 145-175 PSI (two stage).
- Pneumatic throttle idle control.
- Honda GX Series OHV Engine.
- Designed, tested and proven to meet the demands of the construction and rental industry.
Ingersoll Rand
-
The Garage Mate - Single Stage
Standard Features:
- Oil-lube, Single Stage, Electric Drive
- Durable 100% cast iron cylinders and frame.
- Quiet operation
- 100% continuous duty cycle
- Manual thermal overload protection of the motor.
- No starter required.
- Automatic start/stop pressure switch control with manual on/off lever.
- 24 or 30 gallon ASME, National Board coded receiver tank includes discharge mounted check valve, pressure gauge, drain valve, service valve, and relief valve.
- Totally enclosed beltguard provides a shield around the flywheel, belt and motor sheave for your added protection.
- Easy to change filter for clean intake
- Oil sight gauge
- Easy fill oil port
- Regulator included
- All units are prewired and thoroughly tested prior to shipment.
- Splash Lubrication
- 115-1-60 Voltage
- Meets OSHA standards
- UL/CSA/ASME compliant
- Wheel Barrow - Electric or Gasoline Driven
Standard Features:
- Oil-lube, Single Stage Wheel Barrow
- Electric motor with open drip-proof enclosure or
- Gas engine is premium quality Honda or Briggs & Stratton with throttle idle control. Designed for easy starting.
- Durable 100% cast iron cylinders and frame.
- Precision honed cylinders for low oil carryover
- 100% continuous duty cycle
- Regulated outlet provided as a standard feature
- Filter is easy to change for clean intake.
- 8 gallon capacity receiver tank including pressure gauge, safety relief valve, condensate drain valve, and discharge pressure regulator and gauge.
- Totally enclosed beltguard provides a shield around the flywheel, belt and motor sheave.
- Portable, lightweight, low profile with convenient lifting handles.
- Fully assembled
- All units are prewired and thoroughly tested prior to shipment.
- Splash Lubrication
- Meets OSHA standards
- UL/CSA/ASME compliant
Special requests/quotes available. |