|
|
Saylor-Beall - Pressure/Splash Lubricated Air Compressors - Quality and durability begin with design. Saylor-Beall products use materials selected for outstanding strength, wear and heat resistant characteristics. Exacting dimensions and precision tolerances result in a highly efficient air compressor design.
Computer controlled, state-of-the-art equipment perform machining operations with extreme accuracy. In addition, modern quality control procedures continuously monitor the machining process.
The design of Saylor-Beall's pressure lubricated air compressors is especially well suited for industrial environments where extreme operating conditions demand excellence in air compressor design and quality.
High-temperature environments, high duty-cycle service, and applications where other forms of lubrication are unacceptable indicate the need for pressure lubricated systems.
A gear type rotary oil pump mounted at the end of the crankshaft, coupled with rifle drilled crankshaft and connecting rods provide pressurized oil flow to the parts of the compressor that most need lubrication - the crankshaft, connecting rods and piston pins. This system dramatically increases the service life of the compressor.
All Saylor-Beall air compressors are available with optional pressure lubrication.
- Horizontal Tank Mounted Units
- Gasoline Engine
Ingersoll-Rand - Type-30™ Air Compressors - Providing customer-driven air system solutions for more than 100 years. Back then, we called it "serving the customer." Today, we call it "Solutionizing" because your needs have changed and Ingersoll-Rand has evolved into a company focused on providing customer value. Ingersoll-Rand is committed to delivering product, service, and system solutions that save you money and make your business stronger and more successful by providing:
- Lower-life cycle cost.
- Unmatched durability.
- The ability to thrive in punishing applications.
- Economical and efficient solutions to maximize your business.
- Numerous configurations to meet virtually any need.
It's all about choices - Limited choices don't always meet your specific needs. That, in turn, limits your ability to maximize your operation. A supplier that understands your operation, helps solve your problems, and recommends a proper product for your application, optimizes your choices.
In today's market, there are too many misapplied compressors and poorly designed systems contributing to the problem instead of providing a solution. Ingersoll-Rand offers customers the expertise and scope to provide a proper solution. Ingersoll-Rand provides options and options lead to choices. Good choices lead to solutions and solutions lead to saving money through lower costs, increased productivity, improved quality and a better working environment.
-
Two-Stage Gas-Powered Air Compressors - Ingersoll-Rand's two-stage gasoline engine driven air compressors are designed to provide compressed air where electric power is not readily available. Perfect for fleet and field service applications, remote pneumatic applications, and emergency production line needs.
- Available with easy starting Honda, Kohler, or Kawasaki engines.
- Fuel efficient idle control.
- Honda 9 HP with pull or electric start, low oil level shutdown.
- Honda 13 HP with 12 volt electric starter, pull start, gas tank, low oil level shutdown, and 3 amp recharging system.
- Kohler 12.5 HP with 12 volt electric starter and gas tank.
- Kawasaki 11.5 HP with 12 volt electric starter, gas tank, and low oil pressure shutdown.
Jenny/Emglo - Industrial Stationary, Hand Carry & Wheeled Portable Air Compressors
-
Base Plate Mounted
Standard Features:
- Heavy-duty single or two stage cast iron compressor pump.
- Made in Somerset, PA USA.
- Splash lubricated.
- Belt driven with a large flywheel for extra cooling and easier start-up.
- Each unit is filled with Jenny Synthetic Blue Compressor Pump Oil.
- Directional air shroud for reduced pump temperatures.
- Totally enclosed heavy-duty belt guard.
- Powder coated, extra heavy steel base plate.
- Large canister intake filter with replaceable filter elements.
- Pressure relief safety valve.
- Pressure gauge.
- Constant run control set at 105-125 PSI (single stage) or 145-175 PSI (two stage).
- High quality pilot valve.
- Pneumatic throttle idle control.
- Honda GX Series OHV Engine or Kohler OHV V-Twin Engine.
-
Hand Carry
Standard Features:
- Lightweight, compact and extremely portable.
- Single stage, direct coupled, oil lubricated pump.
- Cast iron cylinder for extended pump life.
- Aluminum head for better heat dissipation.
- Each unit is filled Jenny Ultimate Blue Compressor Pump Oil.
- Canister inlet filter with replaceable filter elements.
- Forced ventilation cooling system.
- Powder coated heavy duty steel tank and frame assembly.
- Protectively mounted fittings.
- Anti-vibration feet.
- Air line regulator and two gauges for line and tank pressure.
- Pressure relief safety valve.
- Manual tank drain(s).
- Special unloading valves to assist in motor/engine starting.
- High quality pilot valve.
- Pneumatic throttle idle control.
- Constant run control set at 105-125 PSI.
- Recoil start Honda GX Series OHV Engine.
-
Single/Two Stage Wheeled Portable
Standard Features:
- Heavy-duty single or two stage cast iron compressor pump.
- Made in Somerset, PA USA.
- Splash lubricated.
- Finned intercooler (two stage only).
- Belt driven with a large flywheel for extra cooling and easier start-up.
- Each unit is filled with Jenny Ultimate Blue Compressor Pump Oil.
- Directional air shroud for reduced pump temperatures.
- Totally enclosed heavy-duty belt guard.
- 8 & 15 gallon tanks are low profile, powder coated twin tank receivers.
- 17 & 30 gallon tanks are powder coated and ASME certified.
- Convenient lifting handles.
- Anti-vibration feet.
- Pneumatic tire(s).
- Protectively mounted fittings.
- Manual tank drain(s).
- Large canister intake filter with replaceable filter elements.
- Special unloading valves to assist in motor starting.
- Stainless steel braided discharge hose.
- Tank gauge.
- Regulator and outlet pressure gauge.
- Pressure relief safety valve.
- Designed, tested and proven to meet the demands of the construction and rental industry.
- Constant run control set at 105-125 PSI (single stage) or 145-175 PSI (two stage).
- High quality pilot valve.
- Pneumatic throttle idle control.
- Honda GX Series OHV Engine.
-
Special Portable
- Single/Two Stage Skid Mount
- Two Stage Trailer
- Single Stage Gas Drive Compressor/Generator
Standard Features:
- Heavy-duty single or two stage cast iron compressor pump.
- Made in Somerset, PA USA.
- Splash lubricated.
- Belt driven with a large flywheel for extra cooling and easier start-up.
- Finned intercooler (two stage only).
- Centrifugal unloader (two stage only).
- Each unit is filled with Jenny Ultimate Blue Compressor Pump Oil.
- Totally enclosed heavy-duty belt guard.
- Directional air shroud for reduced pump temperatures.
- Powder coated ASME certified receivers.
- Protectively mounted fittings.
- Manual tank drain(s).
- Large canister intake filter with replaceable filter elements.
- All tanks are powder coated and ASME certified.
- High quality special unloading valves to assist in motor starting.
- Stainless steel braided discharge hose.
- Tank gauge.
- Regulator and outlet pressure gauge.
- Pressure relief safety valve.
- Constant run control set at 105-125 PSI (single stage) or 145-175 PSI (two stage).
- Pneumatic throttle idle control.
- Honda GX Series OHV Engine.
- Designed, tested and proven to meet the demands of the construction and rental industry.
-
Service Vehicle - Single/Two Stage
Standard Features:
- Heavy-duty single or two stage cast iron compressor pump.
- Made in Somerset, PA USA.
- Splash lubricated.
- Belt driven with a large flywheel for extra cooling and easier start-up.
- Finned intercooler (two stage only).
- Centrifugal unloader (two stage only).
- Oil sight glass.
- Each unit is filled with Jenny Ultimate Blue Compressor Pump Oil.
- Directional air shroud for reduced pump temperatures.
- Totally enclosed heavy-duty belt guard.
- Powder coated ASME certified receivers.
- Protectively mounted fittings.
- Bucket high manual and bottom mounted tank drain.
- Large canister intake filter with replaceable filter elements.
- High quality special unloading valves to assist in motor starting.
- Stainless steel braided discharge hose.
- Tank gauge.
- Pressure relief safety valve.
- Constant run control set at 105-125 PSI (single stage) or 145-175 PSI (two stage).
- Pneumatic throttle idle control.
- Honda GX Series OHV Engine.
- Designed, tested and proven to meet the demands of the construction and rental industry.
Special requests/quotes available.
|
|
|
